Audi Workshop Service and Repair Manuals

Removing

• ‒ Remove heater controls =>Page 80-34.

• ‒ → Unclip Bowden cable support bracket -A-.
• ‒ Carefully remove the Bowden cable from the lever arm.

Installing

Installation is carried out in the reverse order; note the following:

• ‒ Check the Bowden cables before fitting, replace stiff or damaged Bowden cables
• ‒ Suspend the Bowden cable -B- in the correct position (coiled section at bottom).

Note:

Connection diagram for Bowden cables =>Page 80-38.