Audi Workshop Service and Repair Manuals

• ‒ Remove series resistor -N24 .
• ‒ → Detach connector -A-.
• ‒ Pull fresh-air blower -B- downwards out of heater.

Detaching fresh-air blower -V2 and base plate

• ‒ → Screw out the bolts -A-.
• ‒ Pull fresh-air blower -B- out of the base plate.

Notes:

• ◆ When installing the blower in the base plate, make sure that connectors -C- are correctly positioned.
• ◆ Following installation, ensure that the fresh air blower is properly positioned in the heater.