Audi Workshop Service and Repair Manuals

Removing

• ‒ Remove the heater .
• ‒ → Press back the catches -A- and pull the heat exchanger out of the heater.

Installing

Installation is carried out in the reverse order; note the following:

Notes:

• ◆ If the heat exchanger does not engage in the heater unit on installation, secure it with two bolts -B-.

• ◆ When replacing the heat exchanger, it is not necessary to remove the heater from the dash panel (vehicles up to Model Year 1996 only).

Attaching seals to the heat exchanger

• ‒ → Bond the seals -A- and -B- all round the heat exchanger with no gaps.