-
‒ → Now unscrew the fastening nuts -1- for the gear stick housing.
The gear stick housing is thus dismantled.
-
‒ Remove push rod, thus unscrewing hexagon socket head bolt -2-.
-
‒ Remove selector rod, thus unscrewing hexagon socket head bolt -3-.
-
‒ Now loosen the entire rear push rod from the gear stick housing -arrows-.
-
‒ Remove the gear stick lever with rear push rod from the gear stick housing.
Installing
Installation is carried out in the reverse order to removal, noting the following:
-
‒ Adjusting shift mechanism
Tightening torques
Rear push rod to gear stick housing
|
6 Nm
|
Selector rod to selector fork/gear stick lever
|
25 Nm
|
Front push rod to rear pushrod
|
25 Nm
|
Gear stick housing to body
|
10 Nm
|
Noise insulation for gear stick housing to rear push rod
|
10 Nm
|
|