Audi Workshop Service and Repair Manuals

Removing

• ‒ Shift selector lever into position "3".
• ‒ → Slide sleeve -1- down as far as it will go.
• ‒ Pull button -2- out of selector lever handle -3- until it clicks (distance -a-) and pull handle upwards.

Dimension -a- = 3 mm

Installing

• ‒ Shift selector lever into position "3".
• ‒ Carefully pull button -2- out of selector lever handle -3- to the position indicated by distance -a-.
• ‒ Then, with button -2- pointing towards front of vehicle, fit handle -3- onto selector lever and push down as far as possible.
• ‒ Turn handle -3- until button -2- points towards the driver's seat. The handle will engage in a vertical groove on the selector lever.

• ‒ → Push handle -3- down fully so that it engages in the circular groove on the selector lever.
• ‒ Press button -2- into handle on selector lever -3-.
• ‒ Pull up sleeve -1- until it engages in selector lever handle -3-.