Audi Workshop Service and Repair Manuals

Note:

All cable ties unfastened or cut open on removal are to be re-attached in same position on installation.

Removing

• ● Lock carrier in service position =>Page 13-1.

• ‒ Detach cover from power steering fluid reservoir.
• ‒ → Disconnect brown electrical connector -3- to radiator fan.
• ‒ Expose wire.

• ‒ → Screw out securing screw -1-.
• ‒ Rotate electric fan in direction of arrow and detach.

Installing

Install in reverse order, paying attention to the following:

• ‒ Install lock carrier =>Page 13-1.