Removing and installing parts of the cooling system
Removing and installing parts of the cooling system
Important: Hot steam can escape when opening cap on expansion tank: Cover cap with a cloth and open carefully.
Notes:
-
◆ When the engine is warm the cooling system is under pressure. If necessary release pressure before commencing repair work.
-
◆ Secure all hose connections with the correct hose clips (same as original equipment):
=> Parts List
-
◆ V.A.G 1921 pliers are recommended when installing spring type clips.
-
◆ Renew all gaskets and seals.
-
◆ The arrow markings on the coolant pipes and on the ends of the hoses must be aligned with each other.
-
◆ Removing and installing viscous fan .
|