Audi Workshop Service and Repair Manuals

Notes:

• ◆ A needle bearing must be fitted in the crankshaft on vehicles with manual gearbox. Install needle bearing if necessary.
• ◆ The needle bearing must not be fitted in the crankshaft on vehicles with automatic gearbox. Remove needle bearing if necessary.

Special tools, testers and auxiliary equipment required

• ◆ Special tool Kukko 21/2 (Pos. 4) and
  Kukko 22/1 (Pos. 1)

• ◆ Special tool VW 207 C

Removing

• ‒ → Pull out using puller -A-, e.g. Kukko 21/2 and Kukko 22/1.

Installing

• ‒ → Drive in using drift 207 C.
• ‒ Lettering on needle bearing must be visible when installed.

→ Installation depth for needle bearing

• ◆ Distance a = 1.5 mm