A4 Mk1
| Radiator and radiator fan - exploded view of components |
| 1 - | Radiator |
| q | Removing and installing → Chapter |
| q | If renewed, change coolant in entire system |
| 2 - | Clip |
| 3 - | Mounting for radiator |
| q | Note installation position |
| 4 - | Coolant hose (top) |
| 5 - | Rubber washer |
| 6 - | Radiator fan -V7- |
| q | Depending on equipment |
| 7 - | Fan ring |
| 8 - | 10 Nm |
| 9 - | 10 Nm |
| 10 - | Electrical connector |
| 11 - | Coolant hose (bottom) |
| q | Going to hose connection for thermostat and coolant expansion tank |
| 12 - | O-ring |
| q | Renew |
| 13 - | Electrical connector |
| 14 - | Radiator fan thermal switch -F18- |
| q | Switching temperatures: Stage 1 on: 92 ... 97 °C/ off: 84 ... 91 °C |
| q | Switching temperatures: Stage 2 on: 99 ... 105 °C/ off: 91 ... 98 °C |
| q | Tighten to 35 Nm |
| 15 - | Seal |
| q | Renew |
| 16 - | Drain plug, 10 Nm |
