A4 Mk1
| Bracket for power steering pump and oil cooler - exploded view |
| 1 - | Lever |
| q | For tensioner |
| 2 - | Fitted bolt |
| q | 30 Nm |
| 3 - | Cover |
| q | For tensioning roller |
| 4 - | Fitted bolt |
| q | 22 Nm |
| 5 - | Tensioning roller |
| q | For poly V-belt |
| 6 - | Bolt |
| q | 22 Nm |
| 7 - | Spring/damper |
| 8 - | Sleeve |
| 9 - | Gasket |
| q | Renew |
| 10 - | Bolt |
| q | 22 Nm |
| 11 - | Bracket for power steering pump and oil cooler |
| q | Removing and installing → Chapter |
| 12 - | Pin |
| 13 - | Seal |
| q | Renew |
| 14 - | Mounting bush |
| q | Removing and installing → Chapter |
| 15 - | Washer |
| q | Note installation position |
| 16 - | Bolt |
| q | 30 Nm |
| 17 - | Nut |
| q | 22 Nm |
| 18 - | Power steering pump |
| q | Removing and installing → Rep. Gr.48 |
| q | Installation position → Chapter |
| 19 - | Bolt |
| q | 22 Nm |
| 20 - | Bracket |
| 21 - | Seal |
| q | Renew |
| q | Engage in lugs on oil cooler |
| 22 - | Bolt |
| q | 25 Nm |
| 23 - | Seal |
| q | Renew |
| 24 - | Oil cooler |
| q | See note → Chapter |
| q | Removing and installing → Chapter |
| 25 - | Poly V-belt pulley |
| q | Installation position: marking “vorne” (front) faces in direction of travel. |
| q | Removing and installing → Chapter |
| 26 - | Bolt |
| q | 22 Nm |
| 27 - | Bolt |
| q | 22 Nm |
| 28 - | Seal |
| q | Renew |
| 29 - | Mounting bush |
| q | Removing and installing → Chapter |
