audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Parts of cooling system (on body) > < Checking oil level
6-Cylinder engine (5-valve turbo), Mechanics
Removing and installing parts of cooling system
Removing and installing parts of cooling system
Warning
Hot steam can escape from the expansion tank when the filler cap is opened. Cover the filler cap with a cloth and unscrew it carefully.

Notes:

  • ◆ When the engine is hot the cooling system is under pressure. Carefully open filler cap on expansion tank to release pressure before starting repair work.
  • ◆ Hoses are secured with spring-type clips. When repairing only use spring-type clips.
  • ◆ V.A.G 1921 pliers are recommended when installing spring-type clips.
  • ◆ The O-rings fitted at the quick-release connections must be renewed if damaged or leaking.
  • ◆ When installing coolant hoses, ensure that they are free of stress and do not come into contact with other components (observe markings on coolant connection and hose).

Perform leak test on cooling system with cooling system tester V.A.G 1274 and adapter V.A.G 1274/8.

Parts of cooling system (on body) > < Checking oil level