Removing and installing parts of cooling system |
WARNING Hot steam or hot coolant can escape when expansion tank is opened; cover filler cap with cloth and open carefully. |
|
Note t
| The cooling system is under pressure when the engine is hot. If necessary, relieve pressure before commencing repair work. |
t
| Renew gaskets and seals. |
t
| Secure all hose connections with the correct type of hose clips (same as original equipment) → Parts catalogue. |
t
| The arrow markings on coolant pipes and on ends of coolant hoses must align. |
t
| Removing and installing viscous fan → Chapter. |
|
|
|