Note:
The illustration shows the correct routing of pipes inside the tank.
- Baffle housing
- Fuel supply hose
- Flange
- Suction jet pump
- Fuel supply hose
-
◆ From fuel pump to suction jet pump
- Fuel return hose
-
◆ From suction jet pump to inner section of baffle housing
Observe safety precautions.
Observe rules for cleanliness => Page 20-3.
Removing
-
‒ The fuel tank must not be more than 3/4 full when removing the fuel delivery unit. Drain fuel tank if necessary.
Procedure => Page 20-107.
-
‒ Detach floor trim in luggage compartment.
-
‒ Unbolt cover for flange.
Warning
-
◆ In extreme cases the fuel pipes/hoses or the fuel can reach a temperature of 100 C on vehicles with unit injector engine. Allow the fuel to cool down before disconnecting the pipes/hoses - acute danger of scalding.
-
◆ Wear protective gloves.
-
◆ Wear protective goggles.
|