Audi Workshop Service and Repair Manuals

Important note:

After reconnecting the voltage supply the following operation steps must be performed:

• ‒ Perform adaption of throttle valve control unit -J338 .
• ‒ Adapt kick down function on vehicles with automatic gearbox .
• ‒ Interrogate fault memory and erase, if necessary => Page 01-9.
• ‒ If the fault memory is erased the readiness code must be produced again => Page 01-71.

Note:

In the first adaption phase, during the basic setting operation for the engine, slightly irregular idling and slight jolting during driving are possible.