-
‒ Enter relevant Display Group number (3 figures) and confirm entry by pressing Q.
Example: To select Display Group 5, press keys 0, 0 and 5.
Note:
To change to another display group proceed as follows:
|
---|
Display group
|
V.A.G 1551
|
V.A.G 1552
|
Higher
|
Press key 3
|
Press ↑key
|
Lower
|
Press key 1
|
Press ↓key
|
Test conditions
-
● No faults stored in fault memory
=> Page 01-10, interrogating fault memory
-
● Vehicle stationary, engine idling, throttle valve closed
-
● Coolant temperature at least 80 °C
-
● Electrical consumers switched off
-
● Air conditioner switched off
-
● On vehicles with automatic gearboxes, the selector lever must be in either P or N position.
|