|
Interrogating and erasing fault memory
Fault table
Notes:
-
◆ If faults occur in the sensors and components being monitored, they will be stored in the fault memory together with an indication of the type of fault.
-
◆ The fault table is arranged according to the 5-digit fault codes in the left-hand column.
-
◆ If a fault is stored in the fault memory and then does not occur again during the next 50 times the engine is started, the fault code will be automatically erased.
-
◆ Sporadically occurring faults (temporary or intermittent faults) will be indicated on the display with the word "sporadic".
-
◆ Components that are indicated as being faulty by VAS 5051 should not be renewed immediately. Always start by checking the wiring, connectors and earth connections for the component using the current flow diagram. This is particularly important in the case of faults which are shown as "sporadic".
|
