–
| Read measured value block, Display group 13 (cylinders 1 and 2), engine running at idling speed. |
t
| Specification: –1.50 mg/H...+1.50 mg/H (milligrams per stroke) |
–
| Read measured value block, Display group 14 (cylinders 4, 5, 6), engine running at idling speed. |
t
| Specification: –1.50 mg/H...+1.50 mg/H (milligrams per stroke) |
–
| If one or more of the values is outside the tolerance, swap round the injectors (except the injector for cylinder 3). |
Note The injector for cylinder 3 contains the needle lift sender. |
–
| If the fault moves along with the injector, fit a new injector → Chapter. |
–
| If the fault remains on the same cylinder, check the compression. |
|
|
|