|
Wheel alignment
Balancing out rear axle toe (front-wheel drive vehicles)
Overall rear axle toe value cannot be adjusted.
The individual toe values can be balanced out by moving the rear axle.
-
‒ Slacken off bolts at mounting brackets.
-
‒ Balance out individual toe values by moving axle beam in elongated holes of mounting brackets.
If overall toe value is outside permitted tolerance or if individual toe values cannot be balanced out, axle beam must be checked for damage and replaced if necessary.
If applicable, body is also to be checked in area of rear axle mounting points/aligned and serviced.
=> Body Repairs Workshop Manual
| 
