audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing ultrasonic sensor control unit J347 > < Servicing ultrasonic interior monitor

A4 Mk1

Removing and installing anti-theft alarm ultrasonic sensor
Removing and installing anti-theft alarm ultrasonic sensor
   
Removing
–  Remove upper B-pillar trim → Rep. Gr.70.
–  Unscrew bolts -arrows-.
–  Detach housing for ultrasonic sensor -1-.
–  Unplug electrical connector -2-.
  A96-10335
–  Release retaining tabs -arrows- on rubber covers -1- and -3-.
–  Detach rubber covers from sensors on housing for ultrasonic sensor -2-.
Installing
Installation is carried out in the reverse order; note the following:
–  Install upper B-pillar trim → Rep. Gr.70.
Tightening torque
  A96-10336
ComponentNm
Housing for ultrasonic sensor to B-pillar trim1.5

   

Removing and installing ultrasonic sensor control unit J347 > < Servicing ultrasonic interior monitor