audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Adjusting fog lights > < Removing and installing fog lights
Renewing fog light bulb
Renewing fog light bulb
   
Removing
Headlight (left-side):
–  If fitted, remove cover -arrow- from power steering reservoir.
  A10-0266
Headlight (right-side):
–  Unscrew bolts -arrows-.
–  Remove air ducts -1- and -2-.
  A10-0746
Both sides (continued):
–  Release retaining tabs -arrows- and detach housing cover -1- from headlight housing.
  A94-10357
–  Unplug electrical connector -1- at fog light bulb.
–  Disengage retaining clip -3- and remove bulb -2- from headlight housing.
Installing
Installation is carried out in the reverse order; note the following:
–  Fit new bulb in housing; do not touch glass part of bulb with bare hands.
–  Secure bulb with retaining clip.
–  Plug in connector and close housing cover.
–  Adjust fog lights → Booklet802.
  A94-10370

Adjusting fog lights > < Removing and installing fog lights