audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Adjusting headlights > < Halogen headlights - Exploded view of components

A4 Mk1

Removing and installing headlights
Removing and installing headlights
Removing
  Note
Use adhesive tape to mask area beneath turn signal and headlight to prevent damage to paintwork.
–  Remove turn signal → Chapter.
   
–  Unscrew bolts -2, 3, 4-.
–  Move headlight -1- slightly towards wing panel -arrow A- and pull inboard side of headlight out of pin -arrow B-.
–  Unplug the electrical connectors.
–  Detach headlight to front.
  A94-10356
Installing
Installation is carried out in the reverse order; note the following:
–  Engage pin -1- on headlight in guide -2- in centre area of vehicle.
–  Align headlight with body contours (gap widths).
  Note
Pay attention to area around wing panel opening when aligning headlight.
–  Tighten bolts.
–  Adjust headlights → Booklet802.
Tightening torque
  A94-0053
ComponentNm
Headlight to lock carrier6

   

Adjusting headlights > < Halogen headlights - Exploded view of components