audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing headlight range control motor > < Renewing bulbs for dipped beam/main beam headlights

A4 Mk1

Renewing bulb for side lights
Renewing bulb for side lights
   
Removing
Headlight (left-side):
–  If fitted, remove cover -arrow- from power steering reservoir.
  A10-0266
Headlight (right-side):
–  Unscrew bolts -arrows-.
–  Remove air ducts -1- and -2-.
  A10-0746
Both sides (continued):
–  Release retaining tab -arrow- and detach housing cover -1- from headlight housing.
  A94-10383
–  Pull bulb holder -1- out of headlight housing.
–  Pull bulb for side lights out of bulb holder.
Installing
Installation is carried out in the reverse order; note the following:
–  Insert new bulb in bulb holder, taking care not to touch glass bulb with bare hands.
–  Press bulb holder into reflector until you feel it engage.
–  Plug in connector and close housing cover.
  A94-10384

Removing and installing headlight range control motor > < Renewing bulbs for dipped beam/main beam headlights