audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing bulb carrier > < Rear light - Exploded view of components

A4 Mk1

Removing and installing rear light
Removing and installing rear light
   
Removing
–  Switch off ignition and take out ignition key.
–  Turn light switch to position “0”.
–  Unscrew retaining clips -1- and -3-.
–  Fold trim -2- to side -arrow-.
  A94-10371
–  Unplug electrical connector -1-.
–  Unscrew nuts -arrows-.
–  Detach rear light -2- towards outside.
Installing
Installation is carried out in the reverse order; note the following:
  Note
Ensure that seal between body and rear light housing seals completely.
–  Before tightening the securing nuts, align the rear light with the contours of the body (uniform gaps all round).
Tightening torque
  A94-10372
ComponentNm
Rear light to body4

   

Removing and installing bulb carrier > < Rear light - Exploded view of components