audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Renewing bulb for turn signal > < Servicing turn signals - vehicles up to 01.1999

A4 Mk1

Removing and installing housing for turn signals
Removing and installing housing for turn signals
   
Removing
Headlight (left-side):
–  If fitted, remove cover -arrow- from power steering reservoir.
  A10-0266
Headlight (right-side):
–  Unscrew bolts -arrows-.
–  Remove air ducts -1- and -2-.
  A10-0746
Both sides (continued):
–  Press retaining clip sideways out of catch -arrow- using a screwdriver.
l  Located on headlight housing on vehicles without fog lights.
l  Located on turn signal housing on vehicles with fog lights.
  A94-0009
–  Press down catch -arrow- and slide turn signal housing out towards the front.
–  Unplug electrical connector.
Installing
Installation is carried out in the reverse order; note the following:
–  Insert turn signal housing in headlight housing (guides must engage in mountings on headlight housing).
–  Lock retaining clip in catch.
  A94-0010

Renewing bulb for turn signal > < Servicing turn signals - vehicles up to 01.1999