| –
| Operate “touch-wipe function” and allow wiper arms to move to end position. |
| –
| Switch off ignition and take out ignition key. |
| –
| Pry cover caps off wiper arms with a screwdriver. |
| –
| Loosen nuts -arrows- several turns. |
| –
| Release wiper arms -1- from wiper shafts one after the other by tilting slightly. |
| –
| Remove nuts completely and detach wiper arms. |
Note | If wiper arm cannot be released from wiper shaft, detach by using a commercially available puller. |
| Installation is carried out in the reverse order; note the following: |
|
|
|
