audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Erasing fault memory > < Fault table for telephone
Radio, Telephone and Navigation System - Self-diagnosis
Self-diagnosis of telephone
Final control diagnosis

Notes:

  • ◆ Final control diagnosis can only be performed with vehicle stationary and engine stopped.
  • ◆ If final control diagnosis detects a fault, locate and eliminate cause of problem if necessary.

The "Final control diagnosis" function tests the loudspeaker wiring.

Performing final control diagnosis:

  • ‒ Press keys 0 and 3 to select "Final control diagnosis" function.
 
→ Indicated on display:
Rapid data transfer    Q
03 - Final control diagnosis
  • ‒ Confirm entry with Q key.
 
→ Indicated on display:
Final control diagnosis    ⇒
Loudspeakers

A test tone is audible through the hands-free loudspeaker.

Note:

Any faults (e.g. short circuits) that occur will be recorded in the fault memory.

  • ‒ Press ⇒key.
 
→ Indicated on display:
Final control diagnosis    ⇒
End
  • ‒ Press ⇒key.
  • ‒ Tester returns to basic function.
 
→ Indicated on display:
Rapid data transfer    HELP
Select function XX

Erasing fault memory > < Fault table for telephone