Self-diagnosis of control unit for seat adjustment with memory function
Encoding memory for driver's seat airbag control unit
Notes:
-
◆ Read out coding before removing the existing control unit.
-
◆ If coding cannot be read out, encode using standard coding (00002).
-
◆ Control unit is not factory-coded.
-
◆ Encoding is carried out with fault reader V.A.G 1551.
If the appropriate encoding is not displayed at the V.A.G 1551 or the control unit has been replaced the encoding of the control unit is carried out as follows:
Performing function "07 - Code control unit"
|