audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Tank flap > < Removing and installing rear lid lock

A4 Mk2

Removing and installing actuator for rear lid
Removing and installing actuator for rear lid
Removing
–  Remove rear lid trim (bottom) → Trim, insulation; Rep. gr.70.
   
–  Disengage operating rod -3- at rear lid lock. To do so, swivel joint bush -4- to right and detach operating rod.
–  Disengage operating rod at actuator -1-; to do so, slide operating rod towards actuator and swivel 90° out of mounting -arrow-.
–  Loosen bolts -2- by approx. 2 turns and disengage actuator at rear lid.
–  Unplug electrical connector.
  A55-0204
–  Unscrew bolts -3-.
–  Tightening torque: 2 Nm
–  Detach adapter plate -2- from actuator -1-.
Installing
Install in reverse order of removal.
  A55-0205

Tank flap > < Removing and installing rear lid lock