audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Rear lid - Avant > < Installing rear lid seal

A4 Mk2

Adjusting bump stops
Adjusting bump stops
   
–  Open rear lid.
–  Detach rubber cap.
–  Screw in bump stop as far as possible.
–  Gradually screw bump stop out again.
–  Press on rubber cap.
–  When correctly adjusted, bump stops must rest lightly on sill when rear lid is closed.
  A55-0191

Rear lid - Avant > < Installing rear lid seal