A4 Mk2
| Removing and installing mirror housing |
| 1 - | Mirror housing |
| q | Removing: |
| q | Remove bolts -4- from trim cover -3- and detach it downwards. |
| q | Release housing from retainers of mirror adjustment unit and lift housing off. |
| q | Installing |
| q | Position mirror housing on mirror adjustment unit -2- from above. |
| q | Retainers -arrows- must engage in mirror adjustment unit at top and bottom → Fig.. |
| 2 - | Mirror adjustment unit |
| 3 - | Cover (bottom) |
| 4 - | Bolts with washers |
| q | 1 Nm |
|
|
