A4 Mk2
Note
|
| 1 - | Mirror housing |
| – | Can be removed without detaching mirror base |
| 2 - | Retaining pin |
| q | Screwed into mirror base |
| 3 - | Mirror base |
| – | Prior to removal, door subframe must be removed. |
| 4 - | Bolts |
| q | 2 Nm |
| 5 - | Sealing piece |
| q | When installing, make sure sealing piece is seated correctly. |
| 6 - | Retaining clip |
| 7 - | Control motor |
| q | Motor can be removed after taking out mirror glass. |
| q | Removing → Chapter |
| 8 - | Torx bolt |
| q | 1 Nm |
| 9 - | Torx bolt |
| q | 1 Nm |
| 10 - | Torx bolt |
| q | 2 Nm |
| 11 - | Friction spring |
| q | When installing mirror glass, insert friction finger in friction spring → Anchor and press mirror glass onto control motor. |
| 12 - | Mounting plate |
| 13 - | Arrester bracket |
