A4 Mk2
| Removing and installing roof rail |
| 1 - | Special nut |
| q | 18 Nm |
| 2 - | Sealing elements with bonded-in seals |
| q | Make sure that it is correctly seated |
| 3 - | Roof rail |
| q | Removing: |
| q | Remove A-pillar trim (top). |
| q | Remove D-pillar trim. |
| q | Remove trim above rear door. |
| q | Unscrew nuts -1- and detach roof rail. |
| q | Installing: |
| q | Make sure that sealing elements are properly positioned at roof rail attachment points. |
| q | Tighten nuts -1- to 18 Nm. |
