A4 Mk2
| Removing and installing roof joint moulding - saloon |
| 1 - | Roof joint moulding |
| q | Removing: |
| q | Carefully lever out of roof joint, starting from rear |
| q | Installing: |
| q | Fit sealing strip -2- on roof joint moulding -1-. |
| q | Apply lubricant (e.g. soap solution) to sealing strip. |
| q | Starting at windscreen -3-, slide roof joint moulding underneath trim cover and gradually press sections of moulding half-way into roof joint. |
| q | Then insert roof joint moulding below trim cover at rear window, and press into roof joint completely. |
| 2 - | Sealing strip |
| q | Coat with lubricant before installing |
| 3 - | Windscreen |
