Audi Workshop Service and Repair Manuals > A4 Mk2 > Body | General body repairs, exterior | Exterior equipment | Strips and panels | Window slot trim strip (rear)

Window slot trim strip (rear) - vehicles with high-gloss package

–	Mask area beneath slot trim strip -1- with adhesive tape -2-.

–	Carefully bend up slot trim strip -1- (rear) -arrow- slightly.

–	Use plastic wedge to prise slot trim strip -1- sideways off mounting.

–	Use plastic wedge -2- to carefully open up bottom lip lower edge slightly on inside of new slot trim strip -1-.

–	To facilitate assembly, coat this edge and mounting with e.g. soap solution.

–	Insert slot trim strip -1- from above and carefully push it completely onto mounting by hand.

Audi Workshop Service and Repair Manuals