audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Adjusting front door > < Removing door window from window regulator

A4 Mk2

Removing and installing window regulator motor
Removing and installing window regulator motor
Removing
–  Door trim removed → Trim, insulation; Rep. gr.70.
  Note
t  Window regulator motor can be removed or installed with motor or side window in any position.
t  Unplug connectors before removing motor.
   
–  Unscrew Torx bolts -2--T30- and detach motor.
Installing
–  When installing, make sure threaded pins -arrows- are engaged in inner door panel.
–  Push on window regulator motor -1- and secure with bolts -2-.
–  Tightening torque: 3.5 Nm
  Note
t  After installing the electric motor and attached wiring, first turn the ignition on and then off again.
t  Then raise door window as far as it will go and keep window regulator switch pulled for approx. 2 seconds.
t  The window regulator is now in the basic setting and the opening/closing function is activated.
  A57-0277

Adjusting front door > < Removing door window from window regulator