| Calibrating a new compass |
| –
| „C“ must appear on display. |
| –
| If „C“ does not appear, press a thin object (e.g. ballpoint pen) against the adjuster switch on the underside of the mirror until „C“ is displayed. |
| –
| Drive slowly (approx. 10 km/h) in a circle (2-3 times) until a point of the compass is displayed. |
| –
| Use thin object (e.g. ballpoint pen) to press against adjuster switch on underside of mirror until appropriate zone number is displayed. |
| –
| Zones are shown in the illustration (map). |
| –
| After several seconds a point of the compass will appear on the display. |
|
|
|
