audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Removing and installing ashtray (rear) > < Removing and installing cup holder and storage compartment
Removing and installing ashtray (front)
Removing and installing ashtray (front)
Special tools and workshop equipment required
   
t  Torque wrench -V.A.G 1410-
  W00-0554
1 - Ashtray (front)
t  Removing:
–  Pull radio approx. 10 mm out of the radio slot → Radio, telephone, navigation; Rep. gr.91.
–  Remove air conditioning system operating and display unit -E87- → Air conditioning system; Rep. gr.87.
–  Open ashtray (front).
–  Take insert out of ashtray (front).
–  On vehicles with manual gearbox: Prise out gearshift cover upwards and detach gear lever boot → Chapter.
–  On vehicles with automatic gearbox: Prise out gearshift cover upwards → Chapter.
–  Unscrew bolts -2- on ashtray.
–  Lift out ashtray (front).
–  Unplug electrical connector.
–  Disengage trim -3- from ashtray.
–  Unclip storage compartment trim -4-.
t  Installing:
Install in reverse order of removal.
2 - Bolts (2x)
q   Tightening torque: 5 Nm
3 - Ashtray trim
4 - Storage compartment trim

   

Removing and installing ashtray (rear) > < Removing and installing cup holder and storage compartment