A4 Mk2
| Removing and installing mobile phone carrier in centre console |
| 1 - | Threaded moulding |
| q | Clipped into centre console from rear |
| 2 - | Centre console |
| q | With openings for base plate |
| q | Making openings on replacement parts → Chapter |
| 3 - | Mounting plate |
| q | For mobile phone handset cradle |
| 4 - | Base plate |
| 5 - | Bolts (6x) |
| q | Tightening torque: 0.5 Nm |
| 6 - | Bolts (2x) |
| q | Tightening torque: 1.5 Nm |
| 7 - | Connector |
Note| Check that connector is correctly seated. |
