A4 Mk2
Detaching cover from padding |
1 - | Cable ties (2x) |
2 - | Rods (2x) |
– | Unfasten cable ties -1- (2x). |
– | Prise out rods -2- (2x). |
1 - | Seat cover |
– | Use screwdriver to prise fastening strips -3- out of plastic clips -2-. |
– | Remove cover -1-. |
– | On vehicles with ISOFIX retainer and new cover fabric -1-, cut slots in fabric cover at location of ISOFIX retainer → Chapter. |
t | Installing: |
Install in reverse order of removal. Observe the following: |
– | Renew plastic clips if damaged. |
– | Start by pressing in plastic clips of cross pieces. |
2 - | Plastic clips |
q | Renew if damaged |
3 - | Fastening strips |