A4 Mk2
|
|
1 - | Fastening strips (peripheral) |
2 - | Side airbag |
3 - | Zip |
4 - | Protective cover for side airbag |
5 - | Opening in padding |
6 - | Bracket |
7 - | Seat cover |
t | Removing: |
– | Remove seat bench (rear): vehicles up to 10.2004 → Chapter, vehicles from 11.2004 onwards → Chapter. |
– | Remove rear seat backrest → Chapter. |
– | Remove head restraints: |
t | Head restraints with slide-in locking mechanism → Chapter |
t | Head restraint without slide-in locking mechanism → Chapter |
– | Remove head restraint guides: |
t | Head restraint guides with slide-in locking mechanism → Chapter |
t | Outer head restraint guides without slide-in locking mechanism → Chapter |
t | Inner head restraint guides without slide-in locking mechanism → Chapter |
– | Use screwdriver to prise out fastening strips (peripheral) -1-. |
– | Pull lower cover -7- over bracket -6-. |
– | Fold over cover -7- in vicinity of side airbag -2-. |
– | Unfasten zip -3- at protective cover for side airbag -4-. |
– | Pull out protective cover for side airbag -4- through opening in padding -5-. |
– | Remove cover and padding from backrest frame. |
t | Installing: |
Fit cover and padding in reverse order to removal. Observe the following: |
– | Close zip at protective cover for side airbag using pliers -VAS 6138-. |