A4 Mk2
Removing and installing seat cushion cover and padding (standard seat) |
1 - | Seat cover |
t | Removing: |
– | Remove seat: vehicles up to 10.2004 → Chapter; vehicles from 11.2004 onwards → Chapter. |
– | Remove backrest: vehicles up to 10.2004 → Chapter; vehicles from 11.2004 onwards → Chapter. |
– | Unclip connector for seat heating -2- from retainer. |
– | Use screwdriver to prise out peripheral plastic strips -3-. |
– | Fold back cover -1-. |
– | Use screwdriver to prise fastening strips -4- out of plastic clips -5-. |
– | Lift off cover -1-. |
– | Detach padding -6-. |
t | Installing: |
Install in reverse order of removal. Observe the following: |
– | Always renew damaged plastic clips -5-. |
– | On vehicles with ISOFIX retainer and new cover fabric -1-, cut slots in fabric cover at location of ISOFIX retainer → Chapter. |
2 - | Connector for seat heating |
3 - | Plastic strips (peripheral) |
4 - | Fastening strips |
5 - | Plastic clips |
q | Renew plastic clips if damaged |
6 - | Padding |
7 - | Seat heating |
8 - | Seat pan |