A4 Mk2
|
|
|
WARNING
|
| 1 - | C-pillar trim |
| t | Removing: |
| – | Remove D-pillar trim → Chapter. |
| – | Loosen both bolts -2- at top and bottom of C-pillar trim -1-. |
| – | Remove side padding → Chapter. |
| – | Unfasten clip -3- beneath side padding; to do so, press a screwdriver between the two clip sections and pull top section of clip upwards. Bottom section of clip is compressed and can be detached. |
| – | Unfasten rear shelf at outer clip and lift shelf up. |
| – | Unfasten C-pillar trim at clip -4- and detach. |
| t | Installing: |
Caution
|
| – | Raise rear shelf. |
| – | Insert trim -1- in mountings at rear shelf. |
| – | Engage clip -4- in its mounting. |
| – | Squeeze bottom section of clip -3- and re-insert clip. |
| – | Screw both bolts -2- back in. |
Caution
|
| – | Secure rear shelf and side padding. |
| 2 - | Bolts (2x) |
| q | Tightening torque: 4 Nm |
| q | Self-locking |
| q | Always renew after removing |
| q | Always clean threaded holes for bolts (using a tap for example) |
| 3 - | Clip (1x) |
| 4 - | Clip (1x) |
