A4 Mk2
| Removing and installing storage well liner |
| 1 - | Storage well liner (optional) |
| t | Removing: |
| – | Release storage well liner -1- from fastener -4-. |
| – | Unfasten both clips -2- between storage well liner -1- and loading aid -3-. |
| – | Lift out storage well liner -1-. |
| t | Installing: |
| Install in reverse order of removal. |
| 2 - | Clips (2x) |
| 3 - | Loading aid |
| 4 - | Fastener for storage well liner |
| t | Removing: |
| – | Slacken off bolt -5- at grip -6- of storage well liner. |
| – | Unfasten fastener -7- for grip. |
| – | Detach grip -6-. |
| – | Loosen both expanding nuts -9-. |
| – | Unfasten the four clips -8-. |
| – | Detach fastener for storage well liner -4-. |
| t | Installing: |
| Install in reverse order of removal. |
| 5 - | Bolt |
| 6 - | Grip |
| 7 - | Fastener for grip |
| 8 - | Clips (4x) |
| 9 - | Expanding nuts (2x) |
