Audi Workshop Service and Repair Manuals > A4 Mk2 > Body | General body repairs, interior | Trim, noise insulation | Trim panels - Avant

Removing and installing base retainer

Special tools and workshop equipment required

t	Torque wrench -V.A.G 1783-

1 -	Base retainer

Removing:

–	Remove luggage compartment side trim on left side of vehicle → Chapter.

–	Slacken off the four bolts -2- at base retainer -1-.

t	Installing:

Install in reverse order of removal.

2 -

Nuts (2x)

q	Tightening torque: 5 Nm

3 -

Nut

q	Tightening torque: 3 Nm

Audi Workshop Service and Repair Manuals