A4 Mk2
Note
|
| 1 - | Brake disc |
| q | Always renew on both sides of axle |
| q | Detach brake caliper prior to removing |
| q | Only dress evenly, on both sides, starting from thickness when new |
| q | Allocation → Chapter |
| q | Thickness → Chapter |
| 2 - | Ribbed bolt, 75 Nm |
| q | M10×1.25 x 60 |
| q | Always renew |
| q | To do so, use socket -T40027- |
| 3 - | Brake carrier with guide pins and protective caps |
| q | Replacement carriers are supplied assembled and with sufficient grease on guide pins |
| q | If protective caps or guide pins are damaged, renew using repair kit. Use grease sachet supplied to lubricate guide pins. |
| 4 - | Ribbed bolt, 75 Nm |
| q | Always renew |
| q | M10×1.25 x 50 |
| 5 - | Brake pads |
| q | Always renew on both sides of axle |
| q | Removing and installing → Chapter |
| q | Checking pad thickness: → Booklet803 |
| q | Different versions available → ETKA |
| 6 - | Splash plate for brake disc |
| 7 - | Flange bolt, 10 Nm |
| q | M6×12 |
| 8 - | Self-locking bolt, 35 Nm |
| q | Always renew |
| q | When loosening and tightening, counter-hold on guide pin |
| 9 - | Brake caliper housing |
| q | Do not disconnect brake hose when changing brake pads |
| q | Servicing brake calipers |
| 10 - | Wheel bolts |
| q | Fitting wheels → Wheels and tyres; Rep. Gr.44 |
| 11 - | Torx bolt |
| q | Tightening torque: 5 Nm |