audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Checking vacuum pump for brakes V192 > < Exploded view

A4 Mk2

Removing and installing vacuum pump for brakesV192
Removing and installing vacuum pump for brakes -V192-
The vacuum pump is not intended to be serviced. If problems occur, trace the fault by means of a function test and/or pressurised leak test. If a fault is found, the vacuum pump for brakes -V192- must be renewed.
Removing:
–  Remove the trim cover.
   
–  Unplug electrical connector -2-.
–  Detach vacuum hose -1- from vacuum pump.
  A47-0127
–  Press clip out of bracket by hand.
–  Lift out vacuum pump for brakes -V192-.
Installing
Installation is carried out in the reverse sequence.
  A47-0128

Checking vacuum pump for brakes V192 > < Exploded view