| –
| Insert the two lugs -A- and -B- in the cam plate groove -C-. |
| Re-install all parts removed in reverse order, paying attention to the following: |
| –
| Lay wiring harness such that it cannot come into contact with moving components (e.g. control motor lever). |
Note | Operation of the control motor can be checked as follows for example: Connect the two contacts “5” and “6” in the control motor connector to a 12V DC source. The control motor moves as far as the stop in one direction. Interchanging positive and negative reverses direction. Use adapter cable for this purpose → Chapter. |
|
|
|
