audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Installing > < Removing and installing intermediate piece for windscreen defroster vent

A4 Mk2

Removing
Removing
–  Remove dash panel → General body repairs, interior; Rep. Gr.70.
–  Detach mounting bracket for brake pedal (and clutch pedal) from dash panel cross member. → Brake system; Rep. Gr.46
   
–  Unfasten hexagon nuts -A- for dash panel cross member on left and screw out by approx. 15 mm. → General body repairs, interior; Rep. Gr.70
–  Remove hexagon nuts -B- for dash panel cross member on right → General body repairs, interior; Rep. Gr.70.
–  Remove connecting bolts between dash panel cross member and windscreen cross member (in passenger compartment) as well as connecting bolts between dash panel cross member and plenum chamber (between electronics box and windscreen cross member in plenum chamber). → General body repairs, interior; Rep. Gr.70
–  Carefully pull dash panel cross member to rear until it makes contact with nuts on left and is still resting on stud on right.
  A87-0456
–  Detach intermediate piece -A- from dash panel cross member -B-.
–  Remove intermediate piece -A-.
  A87-0414

Installing > < Removing and installing intermediate piece for windscreen defroster vent