audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing compressor (vehicles with 8-cyl. engine) > < Removing (belt-driven compressor)

A4 Mk2

Installing
Installing
Install in reverse order, paying attention to the following:
–  Check type of seal at connections and refrigerant pipes (must be designed for same type of seal) → Chapter and → Parts List
Before fitting compressor → Air conditioner with refrigerant R134a
  Note
The compressor removed contains an indeterminate amount of refrigerant oil. Attention is therefore to be paid to notes on compressor replacement. → Air conditioner with refrigerant R134a
–  For tightening torques and O-rings, refer to → Chapter and → Chapter.
–  Re-install remaining components removed.
–  Evacuate and re-fill refrigerant circuit. → Air conditioner with refrigerant R134a
–  Start up air conditioner after installing compressor → Chapter
   

Removing and installing compressor (vehicles with 8-cyl. engine) > < Removing (belt-driven compressor)