audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Erasing fault memory > < Basic setting
Erasing fault memory, end of output
Erasing fault memory, end of output
–  With the ignition switched off, connect up vehicle diagnostic, testing and information system -VAS 5051A- using, for example, diagnostic wire -VAS 5051/5A- and K-wire adapter -VAS 6017B- (or K-wire adapter -VAS 6017A-) to the 16-pin diagnostic socket in the vehicle → Chapter.
–  Switch on ignition.
–  Use address word “08” to select air conditioner/heater electronics → Chapter.
   

Erasing fault memory > < Basic setting